WAZER Protopasta Back-to-basics White PLA Filament - 1.75mm (1kg)
The WAZER Abrasive is preferred and calibrated for use with your WAZER to provide outstanding quality and performance. Restock on this essential material required to produce professional-grade cuts on your WAZER waterjet cutting machine.
Price: | $29.99 (with add-ons) |
---|---|
Availability: | Out of Stock Notify Me |
The WAZER Abrasive is 80-Mesh Alluvial Garnet that is preferred and calibrated for use with your WAZER to provide outstanding quality and performance. This abrasive material is required to cut with your water jet machine. Save big on operation costs when purchasing the 2200lb pallet.
Please note the following:
- Garnet that has been used in the WAZER cannot be reused due to foreign debris mixing in with the garnet during use.
- Once the pallet has been delivered, you will be required to transport the pallet from the truck to your workspace.
What's Included with the WAZER Abrasive?
Bucket
- 1 x 55lb Bucket of WAZER Abrasive
Pallet
- 1 x 2200lb Pallet of WAZER Abrasive
What are the Technical Specifications of WAZER Abrasive?
WAZER 55lb Bucket | WAZER 2200lb Pallet | |
$89 | Starting at $1110 | |
Material: | 80-Mesh Alluvial Garnet | 80-Mesh Alluvial Garnet |
Dimension: | 12” x 15” (D x H) | 42” x 42” x 22” (L x W x H) |
Weight: | 55lbs | 2200lbs |
Lifetime: | 2.75 hrs | 110 hrs |
Est. Operating Cost: | $0.48 / min | $0.14 / min |
Features: | Calibrated for use with WAZER for best performance | Calibrated for use with WAZER for best performance |
Delivery Method: | Standard Parcel Service | Commercial - Freight Forwarder with NO Liftgate* Assistance |
*Liftgate is the foldable metal platform mounted on the back of a freight truck. It is used to lift the pallet from the truck down to the ground.
Questions
Will this sensor work with the SuperVolcano hotend? Do you have any information if it will work with a Modix Big3d?
Would this work on ender 3 pro that has a titan aqua liquid cooling system and volcano plated block and nozzle
Will this work with the titan aero?
What do I need for my e3d V6 to reach above 300c
The temperature sensor is capable of sensing up to 400c but is the heater block attached here capable of handling that temperature? Or do I need to add this? https://www.matterhackers.com/store/l/e3d-v6-plated-copper-heater-block
Is there an installation video? If not is there a manual that I can download for the installation?
need this setup with a volcano block, can you package it like that? also need a heat break
Craftbot 2 upgrade to E3D PT100 temperature sensing.. Is the "total upgrade kit" all I need?
Description says temps up to 400C for PT100 while E3D website has 500C https://e3d-online.com/products/v6-pt100-upgrade-kit which is the correct number?