xTool xTool SafetyPro AP2 Air Purifier
The xTool SafetyPro AP2 is an advanced air purifier for laser cutting and engraving, capturing 99.99% of dust and 97.97% of odors with a 6-stage filtration system. It features auto-sync, material-specific settings, and a quiet 55 dB operation. Compatible with all xTool laser models, it offers extended filter life and cost savings with Cyclone separation technology.
- Captures 99.99% dust, 97.97% odors
- 6-stage filtration with SuperCyclone
- Auto-sync with compatible xTool machines
| List Price: | $999.00 |
|---|---|
| Price: | $999.00 |
| Price: | $... |
| Availability: | In Stock |
xTool SafetyPro AP2
ULTIMATE DUST & ODOR REMOVAL TECHNOLOGY
Breathe easy with the xTool SafetyPro AP2—the state-of-the-art air purification system designed for all laser cutting & engraving users. This intelligent air purifier removes dust and odors like a champ, capturing 99.99% of dust and 97.97% of odors thanks to its 6-stage filtration system. With features like auto-sync, material-specific settings, and extended filter life, it's the ideal companion to your xTool laser machines for safely and cleanly bringing your creative visions to life!
Key Features of the xTool SafetyPro AP2 Air Purifier:
- Removes 99.99% of dust & absorbs 97.97% of odors
- 6-layer filtration system features SuperCyclone filter for a clog-free experience
- Includes intelligent features such as...
- Auto-presets for different materials
- Auto-on/off syncing with some xTool machines
- Monitoring filter lifecycles
- Cyclone separation technology extends pre-filter lifespan by 10 times for cost savings
- Operates at 55 dB for quiet, non-disruptive use
- Compatible with all* xTool laser models for seamless integration
*All xTool machines are compatible with this air purifier, but only some machines can utilize the auto-sync feature. See FAQ for compatibility.
Six Layers, Zero Worries
The xTool SafetyPro AP2 features a comprehensive 6-layer filtration system weighing 20lbs, ensuring thorough removal of fumes, odors, and particles during laser processing. From large particles to microscopic dust and harmful gases, each layer targets specific contaminants, providing a safer and cleaner working environment. See below how each filter freshens your environment:
- SuperCyclone: Blocks 99% of large particles
- Pre-Filter: Captures 90% of visible debris
- Medium Efficiency: Removes 95% of 0.3μm fine dust
- Activated Carbon: Intercepts 84.4% of harmful fumes
- Ultra-Dense Carbon Mesh: Absorbs 97.97% of odors
- HEPA Filter: Filtrates 99.97% of 0.3μm dust, allergens, and viruses
Cyclone Force, Cleaner Course
The xTool SafetyPro AP2's SuperCyclone Separation Technology revolutionizes dust collection with 36 parallel cyclone groups. This innovative system captures 99% of large particles, extends filter lifespan, and offers easy maintenance, making it the ultimate solution for efficient and cost-effective laser cutting dust management.
- Captures 99% of large particles
- Extends pre-filter lifespan by up to 10×
- Washable and reusable, reducing replacement costs
- Prevents filter clogging for consistent performance
Filter Smarter, Not Harder
Experience effortless operation on the xTool SafetyPro AP2 thanks to its intelligent features. It syncs with xTool lasers for automatic on/off, tailors settings to materials, and monitors filter life. With a powerful motor and easy-to-change filters, it offers a superior user experience in air purification.
- Auto-syncs with xTool lasers for seamless operation
- Customizes filtration settings based on material selection
- Real-time filter life cycle monitoring for optimal efficiency
- High-torque motor for rapid exhaust of polluted gases
- Magnetic door design for easy filter replacement
TECHNICAL SPECIFICATIONS
| Compatible Machine(s) | xTool D1 xTool F1 / F1 Ultra xTool M1 / M1 Ultra xTool P2/ P2S xTool S1 Laser machines with a smoke exhaust pipe diameter of 3 inches |
| Auto-Sync Compatibility | xTool F1 Ultra xTool M1 Ultra xTool P2S xTool S1 |
| Filter Layer(s) | ✔ SuperCyclone Filter ✔ Pre-Filter ✔ Medium Efficiency Filter ✔ Activated Carbon Layer ✔ Ultra-Dense Carbon Mesh ✔ High Efficiency Filter |
| Pre-filtration System | Cyclone Separation |
| Control Mode | Touch button, four adjustable gears |
| Feature(s) | ✔ Auto-On/Off (with certain xTool models) ✔ Auto Mode (auto matches ideal settings based on material) ✔ Filter Life Cycle Monitoring |
| Product Size (W × D × H) |
290mm × 491mm × 542mm (11.42" × 19.33" × 21.34") |
| Product Weight | 20.7kg (45.64lb) |
| Noise | 55dB |
| Rated Power | 20W |
| Warranty | 12 Months |
FAQ
Is the SafetyPro AP2 compatible with all xTool laser machines?
Yes, Manual mode is compatible with all xTool lasers: P2S, P2, S1, M1 Ultra, F1 Ultra, D1, D1 Pro, M1, and F1.
Note: Auto-mode is only compatible with P2S, S1, M1 Ultra, and F1 Ultra.
Why can only certain models sync?
Syncing the AP2 with the engraving machine requires a Bluetooth dongle for information transmission.
Currently, only the S1, F1 Ultra, M1 Ultra, and P2S meet this requirement.
Is it compatible with laser machines from other brands?
The diameter size that the xTool SafetyPro AP2 can adapt to is 3 inches. If the size of the smoke exhaust pipe of the laser machine meets the requirements, then it is compatible. Note that it won't be able to utilize the Auto-mode as that is only reserved for the machines listed in the answer to the first question of this section.
Can the air outlets be vented directly into the room?
Yes, exhaust air can be discharged directly into the room because xTool's SafetyPro AP2 purified exhaust air meets the air quality requirements for direct indoor exhaust.
Do I need to turn off the laser fan when the purifier is in use?
The P2 and P2S models need to turn off the fan of the laser machine when used with the purifier. The P2S will automatically turn off the fan when linked with the purifier.
Other laser machines do not need to have the fan turned off when used with the purifier.
How often should the cyclone be cleaned?
It’s recommended to clean it every 6 months, but users can adjust this based on actual usage conditions.
Does the cyclone need to be dried after cleaning?
Yes, it needs to be dried. A damp cyclone can affect the lifespan of the 3rd and 4th filters (the activated carbon layer and the carbon mesh layer).
Questions
Can you print pla without glue on this surface?
Not a question: I just wanted to say that this garolite sheet is awesome. I've been printing on PEI exclusively pretty much ever since I got my printer 9 months ago. I recently started printing PETG and decided to see if there was any other build surface that would have the same amount of adhesion without taking a part of the surface with it when I removed the part. This stuff fits the bill perfectly. Just as good adhesion as PEI with an easier ability to remove the part with the plus that the bottom surface is shiny like glass rather than matte like PEI. Stick this onto the bottom of a flexplate and you'll never look back!
Hi what size do I need for my prusa mk3s?
Can an Ultimaker S7 Sheet be added? Or should the S5 details be updated to include the S7? Is it also compatible? Also, it states that glass is required for the thin sheet and not required for the thick sheet. I have a metal flex plate included with the S7, so which would be needed?
Nylon G sticks almost too well. Had to really really fight to get it off. Any suggestions on a release agent? Plain PVA glue?
Is is possible to GAROLITE BUILD SURFACE in a 410x410mm size? I have a RatRig 400 and would love to get one for it
Is there a worldwide shortage of G10 or something? Many of the ones I want have been out of stock for like a year
Most layerlock garolite surfaces are out of stock with an estimated restock date of January 1. Since it is may 2023, should we expect restocking to occur in January of 2024?
Will Prusas pinda probe still work with garolite applied?
There was an error with the Z access and the nozzle slightly dug into the printbed (Id say maybe .05mm into the bed or pressure on the bed) leaving a trace and a lighter shade/white residue almost on the bed and I fear may be permanent damage any suggestions on restoring/cleaning the bed? (Was printing with PLA Ex-205 Bed-75 )
Any reason why the thick buildplate is not available for the ultimaker s3?
How thick are the plates?
Why no buildplate compatible for the Ultimaker S3!? I hope its just out of stock, for now I'm buying the S5 and cutting it on the table saw.
Interested to get the ender 3 version....Does it come with the adhesive on one side? I am looking to just sit it on top of the magnetic part of a pei bed (so that I can switch between the two) so ideally it is without adhesive. also do you have uk stockists?
Can this be adhered to a Buildtak flexible sheet so it's easy to pop off the bed with the Buildtak system (or similar system)?
How do I remove the LayerLock Garolite Build Surface 9" x 10"?
How well does this keep its form? I mean does it warp easily? I bought gasoline just like this from ebay that was half inch thick and that thing worped in the middle like crazy once it got heated.
Can I order a sheet of 350mm x 350 mm (or slightly larger)?
I have a very large bed that is 500mm x 500mm (19.68in). Is there a custom or oversized version that I can by and cut to fit?
I need a sheet that is 16x16 in, are these sheets the same as the Halogen-Free Garolite G-10 or Multipurpose Flame-Retardant Garolite G-10/FR4 from McMaster-Carr?
The Ender 5 Pro uses a dual magnet build plate (both glass plate and build surface are magnets). Can this be adhered to the top of the flexible magnetic build surface?
Can I print Polycarbonate on this?
Can I print TPU straight to bed without any glue sticks?
Is there a size that is pre-made to fit the prusa i3 mk3s? If not, what is the recommendation for making one of these sheets fit on a prusa and work with their magnetic bed system?
So the email says the 9.25" x 9.25" is back in stock but the web page will not permit me to add it to the cat=rt. What gives?
How well does this work with ABS?
Can this be mounted to a spring steel plate that can be flexed for easy part removal?
I have a 12 x 12 magnetic build plate system. One plate is pei and another is build Tak. Do you sell 12 x 12 flexible steel that I can attach this to?
When applied to the glass, does this material work with Ultimaker S5 auto-leveling or do you have to switch to manual leveling? I intend to have two glass plates to switch between... one with PEI and one with this Garolite but I want to retain auto-leveling if possible, to avoid having to swap between different startup G-code sequences, etc. Thanks!
Can this material be machined? And if so what would you recommend it be coated with for extra protection
When replacing this sheet, can it be applied to another used sheet of garolite or should the previous be removed before placing the new one?
Hi, is this a MatterHacker original product or is it made by someone else? I'm based in the UK and would like to buy this but the international shipping is prohibitive, is there a UK (or EU) based reseller?
Can this be applied over PEI? I have an old Prusa Mk3 PEI spring steel sheet with smooth PEI that I would like to use but don't want to remove the PEI film if possible.
I have a similar build plate on one of my machines. I flipped the spring steel sheet over and attached the Garolite to the opposite side. Now I can use either surface to print on.