Slice Engineering Slice Engineering Mosquito Hotend 12V Kit
The Mosquito Hotend, developed by the geniuses at Slice Engineering, is a radical new take on 3D printer hotend form. Now with the improved keyhole design, the Mosquito Hotend is even hotter (and cooler) than ever.
Ready to use the Mosquito Hotend, but are not sure what you need? This bundle has everything required to get started with this incredible hotend design. It includes the Mosquito Hotend, hotend cooling fan, and heater cartridge, all for the 12V configuration.
List Price: | $170.00 |
---|---|
Price: | $170.00 |
Price: | $... |
Availability: | Only 1 left in stock. |
Order Now: | Ships Tomorrow Free U.S. Shipping |
WHAT THIS KIT INCLUDES:
- Mosquito Hotend (BMG-M Compatible)
- Slice Engineering Hotend Cooling Fan 12v
- Mosquito Hotend Heater Cartridge, 12v 50W
YOU'RE HOT THEN YOU'RE COLD
The core to the Mosquito Hotend is in the separated module design. The frame at the cold end, which feeds the filament down, is separated entirely from the heater block by four metal support rods. This creates a spacious air gap between the two modules, where a minimal, copper heatsink guides the filament down into the heater block, and a small, mounted fan keeps the right amount of air flowing through the whole setup.
By combining each of these design elements, the heat creep effect has been effectively eliminated. The heat will stay contained just where it needs to be for clean, efficient printing-- all in an elegant and compact form.
EASY COME, EASY GO
An additional, exciting benefit of the four-rod design is that the heater block is completely stationary, so inserting and removing your nozzle doesn't move the heater block! With no need to hold the heater block in place, removing and installing your nozzle just became much faster and easier!
FAN FANDOM
The Mosquito Hotend features a small fan that perfectly mounts on the side of the Mosquito Hotend frame, and blows just the right amount of air across the copper heatsink, and away from the print area. This helps ensure the proper temperature required for your 3D printing job is maintained.
SMALLER HOTEND, MORE BUILD VOLUME
All of these incredible design elements of the Mosquito Hotend are achieved in less space than traditional hotends, so by installing a Mosquito Hotend, you actually open up more vertical build volume on your printer! The only downside to this amazing new tool is that you don't have it--yet!
MOUNTING SOLUTIONS FOR THE MOSQUITO HOTEND
Here are some STL's you can download and print in order to mount your new Mosquito Hotend to your favorite 3D printer:
Adapter for E3D V6 |
---|
Adapter for Prusa MK2S |
Adapter for Prusa MK3 |
Groovemount Adapter |
Groovemount Adapter for Titan Aero |
Groovemount Adapter for Bondtech QR |
Railcore II Adapter |
Questions
Would this be compatible with the Sovol SV03?
Will this work with the CR-10 v3?
What extra hardware is needed to fit the PT1000 thermistor in an Ender 3 V2?
What is needed to fit this on a Ender 5 Plus?
is it cr-10 compatible? if so do I have to buy other things to make it? can it reach 320C? cf polycarbonate is 315c
hello , will this work on a Tevo Nereus that has a stock MK8 Bowden 1.75mm 24v type setup? thank you !
I would like to use this to print ultra high temp materials. What upgrades would you recommend besides an upgraded thermistor (i.e. titanium heat break)? Could I order a hot end pre-assembled to reduce unwanted extra parts?
Is this compatible with the Hatchbox Alpha?
Compatible with Anycubic Mega? Thanks
Just wanted everyone to know that this is a drop in exact fit replacement hot end for the RailCore 300ZL. I ordered one from here and it works great, just like the original . And MatterHackers ships FAST. Don't waste your money on cheap imitations. Get a real E3D hot end!
Will this fit a creality CR-X model?
Greetings; What adaptor is needed to install in a chiron and where can it be obtained. Is there a hot end available for a Chiron to goes well above 300c and does the electronics and software in the Chiron support the increased temperature? Thank you and Merry Christmas John
Is the resistor a K-type? How many watts is the heater cartridge? Is 300c the absolute max temp this hot end can handle? Does it include the wiring to attach to the printer or does that need to be purchased separately?
Will this work with the ender 3 Bowden tube set up?
Hi Is this Chiron Compatible. Thanks
Tevo Nereus compatible? And what is max temp and time to heat up?
Are the fully assembled Hot ends tested?
Will this work with the tevo tornado
Is this ready for the RostockMAX v3.2?
Hello, Does this fit the Ender 3? Thank you!
MK3 Compatible?
Longer LK5 Pro 24V compatible?