Slice Engineering Slice Engineering Mosquito Hotend 24V Kit
The Mosquito Hotend, developed by the geniuses at Slice Engineering, is a radical new take on 3D printer hotend form. Now with the improved keyhole design, the Mosquito Hotend is even hotter (and cooler) than ever.
Ready to use the Mosquito Hotend, but are not sure what you need? This bundle has everything required to get started with this incredible hotend design. It includes the Mosquito Hotend, hotend cooling fan, and heater cartridge, all for the 24V configuration.
| List Price: | $170.00 |
|---|---|
| Price: | $170.00 |
| Price: | $... |
| Availability: | Out of Stock Notify Me |
WHAT THIS KIT INCLUDES:
- Mosquito Hotend (BMG-M Compatible)
- Slice Engineering Hotend Cooling Fan 24v
- Mosquito Hotend Heater Cartridge, 24v 50W
YOU'RE HOT THEN YOU'RE COLD
The core to the Mosquito Hotend is in the separated module design. The frame at the cold end, which feeds the filament down, is separated entirely from the heater block by four metal support rods. This creates a spacious air gap between the two modules, where a minimal, copper heatsink guides the filament down into the heater block, and a small, mounted fan keeps the right amount of air flowing through the whole setup.
By combining each of these design elements, the heat creep effect has been effectively eliminated. The heat will stay contained just where it needs to be for clean, efficient printing-- all in an elegant and compact form.
EASY COME, EASY GO
An additional, exciting benefit of the four-rod design is that the heater block is completely stationary, so inserting and removing your nozzle doesn't move the heater block! With no need to hold the heater block in place, removing and installing your nozzle just became much faster and easier!
FAN FANDOM
The Mosquito Hotend features a small fan that perfectly mounts on the side of the Mosquito Hotend frame, and blows just the right amount of air across the copper heatsink, and away from the print area. This helps ensure the proper temperature required for your 3D printing job is maintained.
SMALLER HOTEND, MORE BUILD VOLUME
All of these incredible design elements of the Mosquito Hotend are achieved in less space than traditional hotends, so by installing a Mosquito Hotend, you actually open up more vertical build volume on your printer! The only downside to this amazing new tool is that you don't have it--yet!
MOUNTING SOLUTIONS FOR THE MOSQUITO HOTEND
Here are some STL's you can download and print in order to mount your new Mosquito Hotend to your favorite 3D printer:
| Adapter for E3D V6 |
|---|
| Adapter for Prusa MK2S |
| Adapter for Prusa MK3 |
| Groovemount Adapter |
| Groovemount Adapter for Titan Aero |
| Groovemount Adapter for Bondtech QR |
| Railcore II Adapter |
Questions
Is this the same Mosquito Hot end list on amazon for at a lower cost?
Does this come with the extension cables for the fan, thermistor, and heater cartridge?
Is there a mounting solution for the Bondtech BMG I just purchased so I can convert my Chiron to direct drive?
Do you sell replacement Mosquito thermistors?
Is there a Magnum kit/bundle, or is it possible to upgrade the Mosquito 24V kit to a Magnum version?
Can you mount this on an Creality Ender 5 without any modifications?
I want a full magnum kit with extruder. Can these be liquid cooled.
Why doesn't slice engineering provide a silicone sock for these hotends ?
What nozzles do recommend?
What is the max temp this hotend can reach within spec.?
Does it come with the Boron Nitride? my 24v bundle did not.
What is the lead length of the heater and thermistor cables? Manufacturer site states 1m each but I do not see specs here. Thank you.
Hey @Steganga,
Ours are 1m as well. This should be the same product.