Bambu Lab Bambu Lab Front Door Mounting Kit - X1 & P1 Series
Find spare parts you may need to replace or replenish for your Bambu Lab 3D printer.
Parts in this listing are for the Bambu Lab X1 and P1 Series 3D printer.
loading...
Product No.
loading...
To learn about available discounts, training, and maintenance options, please use the form below and a MatterHackers Expert will contact you within one business day. Alternatively, you can always feel free to give us a call at +1 (800) 613-4290 or email sales@matterhackers.com.
To get an instant quote, add everything you need to your cart, and click "Download as quote".
Spare Parts for X1 and P1 Series
Find spare parts you may need to replace or replenish for your Bambu Lab 3D printer. This listing is for spare parts compatible with BOTH the X1 and P1 Series.
Note that some parts may not be compatible with the X1E. Parts may also be only compatible with one of the two P1 Series 3D printers.
See part descriptions below for information.
Looking for more Bambu Lab 3D printer spare parts?
TABLE CONTENTS
| • CABLES | • COOLING FANS | • EXTRUDER PARTS | • HEATBED PARTS | • HOTEND PARTS |
|---|---|---|---|---|
| • HOUSING PARTS | • XYZ AXIS PARTS | • OTHER |
CABLES
 |
|---|
| PRINTER CABLE PACK (4-IN-1) |
| Overview This comes with 4 cables including the communication cable connecting the AC board and MC cable, the MC board power supply cable, the heat bed power cable for V3 heatbed, and the cable connecting the MC board and the AMS interface board. Replacement Guide Printer Compatibility X1 Series (NOT X1E), P1 Series In the Box 1 × AC to MC cable 1 × XT30 power cable 1 × M2 heat bed 220V cable 1 × AMS to MC cable 1 × Glue |
RETURN TO TABLE CONTENTS
COOLING FANS
 |
 |
|---|---|
| AUXILLARY PART COOLING FAN |
CHAMBER TEMPERATURE REGULATOR FAN |
| Overview A powerful 12W cooling fan installed on the left side of the chamber. It provides a better cooling condition for high-speed 3D printing Replacement Guide for: X1 Series (NOT X1E) P1P P1S Printer Compatibility X1 Series, P1 Series Product Specifications - Voltage: 24V - Operation Voltage: 15V~27V - Rated Speed: 3200 rpm/min - Max Air Flow: 41.03 CFM - Expected Life: 20,000 hrs @ 40°C |
Overview This is responsible for adjusting the temperature within the chamber. It operates based on the detected chamber temp. determining both its on/off status and the speed at which it operates. Replacement Guide for: X1 Series (NOT X1E) P1P (Enclosed) Printer Compatibility X1 Series (NOT X1E), P1P Product Specifications - Voltage: 24V - Operation Voltage: 15V~27V - Rated Speed: 4800 rpm/min - Max Air Flow: 92.56 CFM - Expected Life: 20,000 hrs @ 40°C |
 |
|---|
| CONTROL BOARD FAN |
| Overview This cools the control board and prevents it from overheating and shutting down. The control board fan can't be manually controlled and the printer automatically adjusts the speed. Replacement Guide for: X1 Series P1P (Enclosed) Printer Compatibility X1 Series, P1P Product Specifications - Voltage: 5V - Operation Voltage: 4V~6V - Rated Speed: 4000 rpm/min - Max Air Flow: 3.68 CFM - Expected Life: 20,000 hrs @ 40°C |
RETURN TO TABLE CONTENTS
EXTRUDER PARTS
 |
|---|
| HARDENED STEEL EXTRUDER GEAR ASSEMBLY |
| Overview This is an internal component of the hardened steel extruder unit. It comprises a driven gear and an active gear that work together to feed filament into the hotend. Built with heavy-duty materials, this gear assembly has better capability printing with tough engineering filaments like PAHT-CF and PET-CF for long-lasting performance. If abrasion or clogging occurs due to extended use, users can just replace the gear assembly rather than the whole unit. Replacement Guide Printer Compatibility X1 Series, P1 Series Product Specifications - Supported Filament Diameter: 1.75mm - Supported Filaments: PET-CF, PAHT-CF, PA6-CF, PLA-CF, PETG- CF, PLA, PETG, ABS, ASA, PC, TPU - Reduction Ratio: 9 : 53 |
RETURN TO TABLE CONTENTS
HEATBED PARTS
 |
 |
|---|---|
| HEATBED SENSOR UNIT | HEATBED SIGNAL CABLE |
| Overview This is a piezoelectric ceramic with a bracket installed and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors installed on the bottom of the heatbed. Replacement Guide Printer Compatibility X1 Series, P1 Series |
Overview This is a 6-pin cable connected to the hotbed Sensor for temperature measurement and leveling. Replacement Guide for: X1 Series P1P Printer Compatibility X1 Series, P1P Product Specifications - Plug: Double-ended 6-pin 1.25mm MX seat - Length: 555 +/- 5mm |
RETURN TO TABLE CONTENTS
HOTEND PARTS
 |
|---|
| SILICONE SOCK FOR HOTEND |
| Overview This is made from high-quality silicone for higher temperature resistance (rated to 300°C printing temperatures). Ensuring optimal thermal insulation and tear resistance, this silicone sock also provides the nozzle with long-lasting protection from cooling air and plastic adhesion. Replacement Guide Printer Compatibility X1 Series, P1 Series Product Specifications - Operating Temperature: -10°C to 300°C - Material: Silicone Rubber |
RETURN TO TABLE CONTENTS
HOUSING PARTS
 |
 |
|---|---|
| FRONT DOOR MOUNTING KIT |
GLASS COVER PLATE |
| Overview The kit is an accessory package for installing the glass front door of Bambu Lab X1 and P1 series 3D printers. Replacement Guide Printer Compatibility X1 Series, P1 Series In the Box 1 × Front Door Upper Hinge 1 × Front Door Lower Hinge 1 × Silicone Strip for Door Frame 2 × Door Frame Magnet 2 × Front Door Upper Hinge Screws 2 × Lower Front Door Hinge Screws |
Overview The purpose of the front glass door is to keep the inside of the printer closed, thus providing protection for the printing process while also insulating the enclosure for high- temperature printing. Replacement Guide Printer Compatibility X1 Series, P1S Note: If you want to install this on the P1P, you will need to incorporate the Front Door Mounting Kit and P1S Front Cover in the installation process. In the Box 1 × Front Glass Door 4 × Screws |
 |
|---|
| GLASS COVER PLATE |
| Overview The P1 series and X1C use the same specification of glass cover plate, which is suitable for both P1P and P1S. It's recommended to use the glass cover plate when installing the side panels to avoid the glass cover plate from slipping. Printer Compatibility X1 Series, P1 Series |
RETURN TO TABLE CONTENTS
XYZ AXIS PARTS
 |
 |
|---|---|
| X-AXIS CARBON RODS ASSEMBLY |
XY BELT TENSIONER WIH PULLEY |
| Overview This assembly ensures that the X-axis movement of the toolhead remains consistently fixed on the horizontal plane. Its lightweight and high rigidity characteristics enable the toolhead to achieve stable and high-speed movement along the Y-axis, enabling high-speed printing. Replacement Guide Printer Compatibility X1 Series, P1S Series In the Box 1 × X-axis Carbon Rods Assembly 2 × XY Belt 1 × Connector Tab 2 × M3x6mm Screw 1 × Silicone Glue (2g) |
Overview This is composed of an idler pulley and a bracket, which can change the belt travel distance under the tension of the spring. Replacement Guide Printer Compatibility X1 Series, P1S Series In the Box 1 × XY Belt Tensioner with Pulley 2 × Support gasket 2 × M3x6mm Screw Product Specifications - Material: Metal, Plastic - Color: Black |
 |
|---|
| Z BELT |
| Overview This is a close drive belt with a pitch length of 1142mm, it is installed at the bottom of the Bambu Lab 3D printer. Its main function is to transmit the motion of the Z motor to the three Z-axis lead screws. IMPORTANT TO KNOW You might receive a Z belt with a label that says "XY belt". This is due to improper production operation. The actual product is the Z belt you ordered, which will not affect its functionality. Bambu Lab apologizes for any confusion this may cause. They are taking immediate corrective actions to address this issue and thank you for your understanding. Replacement Guide Printer Compatibility X1 Series, P1S Series Product Specifications - Specification: GT2 - Material: Rubber, fiberglass - Color: Black - Length: 1142mm |
RETURN TO TABLE CONTENTS
OTHER
 |
 |
|---|---|
| ACTIVATED CARBON AIR FILTER |
CABLE CHAIN ASSEMBLY |
| Overview Melt extrusion 3D printers will generate VOCs while printing because the heating temp. of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points produce much fewer VOCs during printing. These VOCs are absorbed by this filter. Replacement Guide Printer Compatibility X1 Series and P1S Product Specifications - Function: Absorbs volatile organic compounds - Working Life: 1440 hours (60 days) cumulative printing time - Materials: Paper box, activated carbon |
Overview With this chain assembly, the trajectory of the toolhead cable and feeding tube can be safely confined to the horizontal plane during printing. It can also protect the toolhead cable and feeding tube from being damaged during repetitive bending as a result of motion. Replacement Guide for: X1 Series P1 Series Printer Compatibility X1 Series, P1 Series In the Box 1 × AP Board Cover 1 × Cable Chain 1 × PTFE Rubber Grommet 1 × Cable Bracke 1 × PTFE Pneumatic Connector & Collect Clip Product Specifications - Materials: Plastic, Silicone Rubber |
 |
|---|
| NOZZLE WIPER |
| Overview This is used to clean up the waste overflowing from the nozzle of the printer. It consists of PP elastic structure, PTFE tube, and a lock screw. When the PP elastic structure undergoes plastic deformation or fracture, the nozzle wiper can be replaced. When the PTFE tube becomes loose and can be rotated, please tighten the screws to ensure that the PTFE tube cannot be rotated (be careful not to over-tighten it to cause slippage). If slippage occurs, please replace the nozzle wiper. Replacement Guide Printer Compatibility X1 Series, P1 Series In the Box - 3 × Nozzle Wiper |
RETURN TO TABLE CONTENTS
Bambu Lab
Bambu Lab X1E 3D Printer
starting at $2,49900
Request a Quote
