Bambu Lab Bambu Lab Extruder Filament Sensor - X1 Series
New
Find spare parts you may need to replace or replenish for your Bambu Lab 3D printer.
Parts in this listing are for ONLY the Bambu Lab X1 Series 3D printer.
loading...
Product No.
loading...
To learn about available discounts, training, and maintenance options, please use the form below and a MatterHackers Expert will contact you within one business day. Alternatively, you can always feel free to give us a call at +1 (800) 613-4290 or email sales@matterhackers.com.
To get an instant quote, add everything you need to your cart, and click "Download as quote".
Spare Parts for X1 Series
Find spare parts you may need to replace or replenish for your Bambu Lab 3D printer. This listing is for spare parts exclusive to the X1 Series.
Note that some parts may not be compatible with the X1E.
See part descriptions below for information.
Looking for more Bambu Lab 3D printer spare parts?
TABLE CONTENTS
BOARDS
 |
 |
|---|---|
| EXTRUDER INTERFACE BOARD V9 |
MC BOARD |
| Overview This is the part of the tool head board where the print head wires are connected. It's also connected to the main TH board V9 and it's only compatible with V9 version of the TH board. Replacement Guide Printer Compatibility X1 and X1C (NOT for X1E) In the Box - 1 × Extruder Interface Board V9 - 1 × M1_6-4 - 1 × Glue |
Overview MC board is the abbreviation of the machine controller board. It is the control center for the XYZ-axis motors, the cooling fans, the heat bed, and the AMS. Replacement Guide Printer Compatibility X1 Series Exclusive |
 |
|---|
| TH BOARD SET V9 (DUAL RED LASER) |
| Overview A set of circuit boards installed on the printer's toolhead. Check the version of your X1 Series TH board BEFORE you purchase and attempt to replace it on your Bambu Lab. Ordering the wrong version will result in compatibility issues. If the Micro Lidar SN starts with 00ExxB, your TH board is also the dual red version with an SN that starts with 003xxC, 003xxD, or 003xxY. If the Micro Lidar SN starts with 00ExxB, your TH board is also the single red version with an SN that starts with 003xxA or 003xxB. There is no difference in functionality between the Dual Red Laser version and the Single Red Laser version. The Single Red Laser TH board is discontinued and has been replaced by the Dual Red Laser TH board. The Dual Red Laser TH board works with the Dual Red Laser LIDAR. Printer Compatibility X1 and X1C (NOT for X1E) In the Box - 1 × Extruder Interface Board V9 - 1 × TH Board FPC Cable V9 - 1 × Extruder TH Board V9 - 1 × M1_6-4 - 1 × Glue |
RETURN TO TABLE CONTENTS
CABLES
 |
 |
|---|---|
| DISPLAY CONNECTOR FLEX CABLE |
MC AP CABLE PACK (2-IN-1) |
| Overview Connect the high-resolution screen and motherboard with the Display Connector Flex Cable. Use it to transmit SD card data and display images between the screen and printer. Replacement Guide Printer Compatibility X1 Series Exclusive Product Specifications - Cable Length: 265 - Cable Width: 24mm |
Overview Two cables that connect the AP board and MC board of the X series printers, supplying the power from MC to AP, and data interaction between them. Replacement Guide Printer Compatibility X1 Series Exclusive |
 |
|---|
| USB-C CABLE |
| Overview This cable is installed in the towing chain. Replacement Guide Printer Compatibility X1 Series Exclusive |
RETURN TO TABLE CONTENTS
EXTRUDER PARTS
 |
 |
|---|---|
| EXTRUDER FILAMENT SENSOR |
HARDENED EXTRUDER UNIT |
| Overview This is used in the Extruder to detect the presence of the filament, and also detect the Filament Cutter lever. Replacement Guide Printer Compatibility X1 Series Exclusive In the Box - 1 × Extruder Filament Sensor - 2 × BT2-5 - 1 × Glue |
Overview This is equipped with double gears made of hardened steel. It provides increased extrusion force preventing slippage and enhances abrasion resistance. These gears enable the extruder unit to handle tough fiber-filled filaments such as carbon fiber nylon and glass fiber nylon. In addition, the extruder unit includes a sensor that supports filament break detection, which can help prevent print failures and improve overall printing efficiency. Replacement Guide Printer Compatibility X1 and X1C (NOT for X1E) Product Specifications - Supported Filament Diameter: 1.75mm - Supported Filaments: PET-CF, PAHT-CF, PA6-CF, PLA-CF, PETG-CF, PLA, PETG, ABS, ASA, PC, TPU - Reduction Ratio: 9 : 53 |
RETURN TO TABLE CONTENTS
HOTEND PARTS
 |
 |
|---|---|
| CERAMIC HEATER | THERMISTOR |
| Overview The 48W ceramic heater can heat the nozzle up to 300°C, which is for use with Bambu Lab complete hotend assemby only. Replacement Guide Printer Compatibility X1 and X1C (NOT for X1E) In the Box - 3 × Ceramic Heater - 3 × Thermal Grease - 3 × Retaining Clip |
Overview This has a highly accurate temperature measurement and reliable structural design. It is for use with Bambu Lab complete hotend assembly only. Replacement Guide Printer Compatibility X1 and X1C (not for X1E) In the Box - 3 × Thermistor - 3 × Thermal Grease - 3 × Retaining Clip Product Specifications - Operating Temp: -10°C to 300°C |
 |
|---|
| COOLING FAN |
| Overview This is used to cool and reduce the temperature of the ceramic heater. It has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The circuit attempts to restart in 2 to 6 seconds. There is no damage after 72 hours of locking. The cooling fan is a high-speed rotating part. Do not touch it while it is running. Replacement Guide Printer Compatibility X1 and X1C (NOT for X1E) Product Specifications - Voltage: 5 V - Operation Voltage: 3 V~6 V - Rated Speed: 15,500 rpm/min - Max Air Flow: 2.96 CFM - Expected Life: 50,000 hrs @ 40°C |
RETURN TO TABLE CONTENTS
TOOLHEAD PARTS
 |
 |
|---|---|
| FRONT HOUSING ASSEMBLY |
MICRO LIDAR (DUAL RED LASER) |
| Overview This is mainly used to cool the printed part so that the printed part can be shaped. Replacement Guide Printer Compatibility X1 Series Exclusive |
Overview This sensor can measure depth in micrometers. Using this unit, the system can measure the distance, calibrate the flow extruded from the nozzle, and scan the first layer. Replacement Guide Printer Compatibility X1 Series Exclusive |
RETURN TO TABLE CONTENTS
OTHER
 |
 |
|---|---|
| CHAMBER CAMERA | HIGH RESOLUTION SCREEN |
| Overview Chamber camera is included by default in the X1-Carbon and is an optional upgrade for the X1. The chamber camera has three functions: Remote Livestreams, Spaghetti Detection, and Time- lapses. Install/Replacement Guide Printer Compatibility X1 and X1C (NOT for X1E) Product Specifications - Resolution Ratio: 1920 × 1080 - Frame Rate: 30 fps - FOV: 110° - FN: 2.6 |
Overview This is a 5-inch 1280×720 touch screen, that you can use to control the printer. Replacement Guide Printer Compatibility X1 Series Exclusive Product Specifications - Screen Resolution: 720×1280 - Screen Size: 5" - Screen Ratio: 16:09 - Screen: Capacitive Touch - External Interface: Micro SD - Rotating Angle: 5° - 55° |
RETURN TO TABLE CONTENTS
Bambu Lab
Bambu Lab X1E 3D Printer
starting at $2,49900
Request a Quote
